Release Notes PTV xServer 1.20.1
PTV xCluster Server
1.20.1.3
- Improvement: Updated commons-collections to version 3.2.2.
- Bugfix: Improved performance when amending a new location by avoiding calculation of unnecessary distance matrix fields.
1.20.1.2
- Release is necessary for a consistent dependency tree in PTV xServer bundle.
1.20.1.1
- Release is necessary for a consistent dependency tree in PTV xServer bundle.
1.20.1.0
- Improvement: PTV xServer ship with sample configurations for basic authentication.
- Improvement: The routing profile supports the attribute maximumSpeed.
PTV xDima Server
1.20.1.3
- Improvement: Updated commons-collections to version 3.2.2.
- Bugfix: Improved performance when amending a new location by avoiding calculation of unnecessary distance matrix fields.
1.20.1.2
- Bugfix: Time-dependent feature layers are now considered correctly for time zones with offset 0.
- Bugfix: The routingnetworkgenerator can handle the profile parameter 'ForbiddenCountry'.
1.20.1.1
- Release is necessary for a consistent dependency tree in PTV xServer bundle.
1.20.1.0
- Improvement: PTV xServer ship with sample configurations for basic authentication.
- Improvement: The routing profile supports the attribute maximumSpeed.
- Bugfix: Start-up behavior is more robust for shared distance matrix directories.
PTV xLoad Server
1.20.1.2
- Improvement: Updated commons-collections to version 3.2.2.
1.20.1.1
- Release is necessary for a consistent dependency tree in PTV xServer bundle.
1.20.1.0
- Improvement: PTV xServer ship with sample configurations for basic authentication.
PTV xLocate Server
1.20.1.3
- Improvement: Updated commons-collections to version 3.2.2.
1.20.1.2
- Improvement: Log additional use cases for asynchronous methods.
1.20.1.1
- Improvement: Log additional use cases.
1.20.1.0
- Improvement: PTV xServer ship with sample configurations for basic authentication.
- Bugfix: Geocoding results containing house numbers combined with long postal codes are sorted correctly.
PTV xMap Server
1.20.1.3
- Improvement: Updated commons-collections to version 3.2.2.
- Improvement: Updated RoadEditor truck attribute icons to match feature layer PTV_TruckAttributes icon appearance.
- Bugfix: Capital cities of countries with split integration units are displayed correctly at all zoom levels (e.g. Moscow or Washington DC).
- Bugfix: Feature layer icons for PTV_TruckAttributes are shown only once for the same incident in both directions.
- Bugfix: Direction indicators for left-hand traffic are displayed correctly for feature layer rendering.
- Bugfix: US Interstate labels are displayed correctly for the PTV North America 2015 HERE map.
- Bugfix: Avoid exception by removing # characters in POI descriptions.
1.20.1.2
- Bugfix: Time-dependent feature layers are now considered correctly for time zones with offset 0.
- Bugfix: The temporary geographical indexation lock files are removed for dynamic content.
1.20.1.1
- Improvement: Log additional use cases.
- Improvement: The style of the road editor icons is harmonized to the new style of the feature layer icons.
- Bugfix: Tunnel restriction icons are displayed correctly.
- Bugfix: The number of object infos for the visible feature layer objects is now correct.
- Bugfix: RawBitmaps in renderMap requests are displayed correctly.
- Bugfix: Empty layers are treated correctly.
1.20.1.0
- Feature: In case of more than one feature layer icon on one segment, the icons are displayed in a group box or at least as group icon.
- Improvement: PTV xServer ship with sample configurations for basic authentication.
- Improvement: Notifications from the PTV Content Update Service may be sent to one module after the other.
- Improvement: For several use cases the feature layer performance is improved.
- Improvement: For the feature layer preferred routes it is possible to display only a specific type.
- Improvement: For time-dependent feature layers there are the new restriction values INVALID and ALL_VALID available.
- Improvement: For feature layer object infos it is possible to use a unique Id (from hiId, loId and coordinates).
PTV xMapmatch Server
1.20.1.5
- Improvement: Updated commons-collections to version 3.2.2.
1.20.1.4
- Improvement: Adjustments for matching on the PTV World City Map.
1.20.1.3
- Improvement: Log additional use cases.
1.20.1.2
- Improvement: When using the local-matching profile, the radius to consider matches has been reduced. This will lead to more accurate results and improves performance in some cases.
- Bugfix: The vendorID of a segment (if requested and additional data is installed) is returned in all cases.
1.20.1.0
- Improvement: PTV xServer ship with sample configurations for basic authentication.
- Improvement: For TomTom maps, speed limit data is accessible for all network classes without any additional license.
PTV xRoute Server
1.20.1.3
- Improvement: Updated commons-collections to version 3.2.2.
1.20.1.2
- Improvement: Log additional use cases for asynchronous methods.
- Bugfix: The API RoutingParameter ALLOW_SEGMENT_VIOLATIONS works again. Setting this parameter via API is not recommended, please use the corresponding parameter in the routing profile instead.
- Bugfix: Time-dependent feature layers are now considered correctly for time zones with offset 0.
- Bugfix: The temporary geographical indexation lock files are removed for dynamic content.
- Bugfix: The routingnetworkgenerator can handle the profile parameter 'ForbiddenCountry'.
1.20.1.1
- Improvement: Log additional use cases.
- Improvement: The tunnel restriction code in the feature layer data is configurable per waypoint.
- Improvement: The performance of the high-performance routing is improved.
- Improvement: The default layer size of the legacy traffic patterns is increased.
1.20.1.0
- Feature: High-performance routing is supported (only 64-bit version).
- Feature: Emission calculation for UK is supported (DEFRA 2014).
- Feature: Emission calculation for Australia is supported (COPERT 1.2).
- Feature: Australian driver regulations are supported.
- Improvement: PTV xServer ship with sample configurations for basic authentication.
- Improvement: ISO2 and ISO3 country codes in the parameters ROUTING_COUNTRIES and EXCLUDE_COUNTRIES are supported for all countries except Russia, Australia, the United States, and Canada.
- Improvement: Feature layer violation messages are more detailed and give the specific cause.
- Improvement: Matrix calculation with dynamic time steps is supported.
- Improvement: The routing profile supports the attribute maximumSpeed.
- Improvement: Height data files are part of the map data. Their location is not configurable anymore.
- Improvement: For TomTom maps, speed limit data is accessible for all network classes without any additional license.
- Improvement: Calculating and rounding of travel times is harmonized for all routing types.
- Improvement: Notifications from the PTV Content Update Service may be sent to one module after the other.
- Bugfix: RoadEditor databases are reconnected if the connection was lost.
- Bugfix: In case of using calculateReachableObject linking to nodeID or segmentID an exception is returned instead of crashing.
- Bugfix: In case of using the 32-bit version, HBEFA and the Europe City Map 2015.2H the server starts without the exit code 50.
PTV xTerritory Server
1.20.1.3
- Improvement: Updated commons-collections to version 3.2.2.
- Bugfix: Improved performance when amending a new location by avoiding calculation of unnecessary distance matrix fields.
1.20.1.2
- Bugfix: Time-dependent feature layers are now considered correctly for time zones with offset 0.
- Bugfix: The routingnetworkgenerator can handle the profile parameter 'ForbiddenCountry'.
1.20.1.1
- Bugfix: For changeTerritories, candidate IDs are returned correctly in the response.
1.20.1.0
- Feature: Territories can be balanced according to estimated tour durations.
- Feature: Activity limits for territories are supported.
- Feature: Compatibility checks between territories and locations are supported.
- Improvement: PTV xServer ship with sample configurations for basic authentication.
- Improvement: The routing profile supports the attribute maximumSpeed.
- Bugfix: Start-up behavior is more robust for shared distance matrix directories.
- Bugfix: The TerritoryOptimizer profile is also considered for changeTerritories.
PTV xTour Server
1.20.1.3
- Improvement: Updated commons-collections to version 3.2.2.
- Bugfix: Improved performance when amending a new location by avoiding calculation of unnecessary distance matrix fields.
- Bugfix: Input plans are handled correctly for
planOvernightTours
.
- Bugfix: Avoid unnecessary waiting times when using break intervals.
- Bugfix: Fixed crash in internal time profile calculation.
1.20.1.2
- Improvement: Log additional use cases for asynchronous methods.
- Bugfix: Time-dependent feature layers are now considered correctly for time zones with offset 0.
- Bugfix: planOvernightTours can handle an input plan.
- Bugfix: TourBalancing can handle empty tours.
- Bugfix: Waiting period is reported correctly at TourPoints.
- Bugfix: The routingnetworkgenerator can handle the profile parameter 'ForbiddenCountry'.
1.20.1.1
- Improvement: Log additional use cases.
1.20.1.0
- Improvement: PTV xServer ship with sample configurations for basic authentication.
- Improvement: The routing profile supports the attribute maximumSpeed.
- Bugfix: Start-up behavior is more robust for shared distance matrix directories.
- Bugfix: Pickup and delivery order (TransportAB) proposals are returned correctly in the FindUnscheduledOrderForTours response.
PTV xServer bundle
1.20.1.3
- Includes: PTV xCluster Server 1.20.1.3
- Includes: PTV xDima Server 1.20.1.3
- Includes: PTV xLoad Server 1.20.1.2
- Includes: PTV xLocate Server 1.20.1.3
- Includes: PTV xMap Server 1.20.1.3
- Includes: PTV xMapmatch 1.20.1.5
- Includes: PTV xRoute Server 1.20.1.3
- Includes: PTV xTerritory Server 1.20.1.3
- Includes: PTV xTour Server 1.20.1.3
- Includes: PTV xServer add-on AJAX Maps 3.5.9.0
- Includes: Code Sample Browser 1.20.1.2
1.20.1.2
- Includes: PTV xCluster Server 1.20.1.2
- Includes: PTV xDima Server 1.20.1.2
- Includes: PTV xLoad Server 1.20.1.1
- Includes: PTV xLocate Server 1.20.1.2
- Includes: PTV xMap Server 1.20.1.2
- Includes: PTV xMapmatch 1.20.1.4
- Includes: PTV xRoute Server 1.20.1.2
- Includes: PTV xTerritory Server 1.20.1.2
- Includes: PTV xTour Server 1.20.1.2
- Includes: PTV xServer add-on AJAX Maps 3.5.9.0
- Includes: Code Sample Browser 1.20.1.2
1.20.1.1
- Includes: PTV xCluster Server 1.20.1.1
- Includes: PTV xDima Server 1.20.1.1
- Includes: PTV xLoad Server 1.20.1.0
- Includes: PTV xLocate Server 1.20.1.1
- Includes: PTV xMap Server 1.20.1.1
- Includes: PTV xMapmatch 1.20.1.3
- Includes: PTV xRoute Server 1.20.1.1
- Includes: PTV xTerritory Server 1.20.1.1
- Includes: PTV xTour Server 1.20.1.1
- Includes: PTV xServer add-on AJAX Maps 3.5.8.0
- Includes: Code Sample Browser 1.20.1.2
1.20.1.0
- Includes: PTV xCluster Server 1.20.1.0
- Includes: PTV xDima Server 1.20.1.0
- Includes: PTV xLoad Server 1.20.1.0
- Includes: PTV xLocate Server 1.20.1.1
- Includes: PTV xMap Server 1.20.1.0
- Includes: PTV xMapmatch 1.20.1.0
- Includes: PTV xRoute Server 1.20.1.0
- Includes: PTV xTerritory Server 1.20.1.0
- Includes: PTV xTour Server 1.20.1.0
- Includes: PTV xServer add-on AJAX Maps 3.5.7.0
- Includes: Code Sample Browser 1.20.1.0
Copyright © 2025 PTV Logistics GmbH All rights reserved. | Imprint